Projector Mount Accessories

PLMT-LD

Structural Ceiling Mount

  • Small footprint ceiling mount for light-duty loads
  • Easy cable access into pole
  • Mount footprint: 6” x 5” x 2”
  • Stylish black finish

Specifications

  • 2” pole
  • Weight capacity: 50 lbs.
  • 1 year warranty

Dimensions

  • PLMT-LD 8.0”w x 6.0”d x 4.5”h 1 lb.

PLMT-T

Structural Mount Ceiling

  • A heavy-duty mounting pan for large loads
  • Easy cable access into pole
  • Stable footprint - vibration isolation available (PLMT-VIT)
  • Stylish black finish

Specifications

  • 2” pole
  • Weight capacity: 500 lbs.
  • 1 year warranty

Dimensions

  • PLMT-T 12.0”w x 2.0”d x 2.0”h 5 lb.
  • Mounting hole spacing: 10” x 10”

PLMT-WA

Structural Wall Mount Arm

  • A heavy-duty wall arm with 7” extension
  • Additional lengths also available
  • Easy cable access into pole
  • Stable footprint
  • Stylish black finish

Specifications

  • 2” pole
  • Weight capacity: 150 lbs.
  • 1 year warranty


C-Clamp Pole Coupler

  • C-Clamp attaches to 2” structural pipe or truss
  • Weight capacity: 300 lbs
  • Cable pass-through into pole
  • 2” threaded collar for pole
  • Stylish black finish

Dimensions

  • PLMT-C 1.5”h x 6.5”w x 3.0”d 2 lbs.

Click HERE for Spec Sheet

U-Channel Pole Mount

  • Attaches to structural U-Channel (i.e., UniStrut, PowerStrut)
  • Weight capacity: 30 lbs.
  • 2” threaded collar for pole

Dimensions

  • PLMT-U 3.0”h x 2.5”w 1 lbs.

Angled Mounting Pan

  • Attaches to angled structural ceiling
  • Adjustable from 0° - 90°
  • 200 lbs. capacity
  • 2” threaded collar for pole
  • Stylish black finish

Dimensions

  • PLMT-AA 1.2”h x 4.0”w 3 lbs.

Rotating Ceiling Mount

  • 360° rotation - manual operation
  • 200 lbs. capacity
  • Multiple stop positions - easy to set
  • Locks into show position with quick-release pin
  • Use with 2” diameter pole

Dimensions

  • RCM 3.0”h x 3.6”w 2 lbs.


PLMT-A Series

Adjustable Pole

  • An adjustable pole for medium- to heavy-weight projectors and flat panel displays
  • Available in 1’-2’, 2’-4’, 3’-6’, and 4’ -8’ lengths
  • • Stable 2” pole with good cable access through pole
  • Threaded top and bottom to mate with PLMT & PCM
  • Stylish black finish

Specifications

  • 2” pole
  • Weight capacity: 300 lbs.
  • 1 year warranty

Dimensions
Does not include mount or projector

  • PLMT-A1 2.5”w x 13.5”-23.7”h 5 lbs.
  • PLMT-A2 2.5”w x 25.5”-47.7”h 11 lbs.
  • PLMT-A3 2.5”w x 37.5”-71.9”h 17 lbs.
  • PLMT-A4 2.5”w x 49.7”-95.7”h 23 lbs.

PLMT-TP-A Series

Pole/Plate Combination

  • An integrated mounting plate and adjustable pole combination for medium to light-weight projectors and flat panel displays
  • Available in 1’ -2’, 2’ - 4’, and 3’ - 6’ lengths
  • Stable 2” pole with good cable access through pole
  • Stylish black finish

Specifications

  • 2” pole
  • Weight capacity: 50 lbs.
  • 1 year warranty

Dimensions

Does not include mount or projector

  • PLMT-TP-A1 5.5”w x 5.5”d x 13.9”-23.7”h 5 lbs.
  • PLMT-TP-A2 5.5”w x 5.5”d x 25.5”-47.7”h 11 lbs.
  • PLMT-TP-A3 5.5”w x 5.5”d x 37.5”-71.9”h 17 lbs.
  • Mounting hole spacing: 4.5” x 4.5”


Metric conversion: Inches x 25.4


Pole Offset

  • For working around obstructions like HVAC
  • Provides up to 4” of horizontal offset
  • Offset plate has male and female 2” NPT threads
  • Cable pass-through
  • Locate projector directly below T-grid

Dimensions

  • OS-4 1.5”h x 6.5”w x 3.0”d 1 lb.

Click HERE for Spec Sheet

Couplings

Reducer & Enlarger

  • 15-2 adapts existing 1 ½” poles to 2” mount
  • 2-15 adapts 2” poles to 1 ½” mount
  • Black zinc coated

Dimensions

  • 2-15/15-2 3”h x 2.5”w 1 lb.

Ceiling Trim Rings

The Finishing Touch

  • Two-part ring - snap compression together
  • Magnetic interior holds to steel pole
  • Slides up flush with ceiling
  • Black, white, or primer grey
  • For 2” diameter poles

Dimensions

  • CTR 1.2”h x 4.0”w 1 lb.


PowerPRO

  • Install the projector pole and simultaneously - save time and money
  • Flex conduit installs through the center of the pole to provide a duplex outlet next to the projector or display - meeting electrical code requirements
  • PowerPRO 1 for integration above the ceiling
  • PowerPRO 2 for power distribution below ceiling
  • For projectors, single or dual flat panel displays

Specifications

  • Weight capacity: 300 lbs.
  • PP1 provided with (1) bell box
  • PP2 provided with (2) single-gang j-boxes
  • For 2” fixed or adjustable poles
  • Stylish black finish
  • 1 year warranty

Dimensions

  • PowerPRO 1 4”h x 7.5”w x 4.2”d 4 lbs.
  • PowerPRO 2 4”h x 9.0”w x 4.2”d 4 lbs

Pole Stabilizing Kit

  • For long-length poles
  • For heavy loads on long poles
  • Kit includes: ( 3) outrigger brackets, pole compression clamp and (3) lower clamps
  • Installer provides the connective material: 1/2” EMT conduit, Threaded Rod or Wire Rope
  • Available with vibration isolation

Specifications

  • For 2” fixed or adjustable poles
  • Stylish black finish
  • 1 year warranty

Dimensions

  • PSK-Kit 4”h x 7.5”w x 4.2”d 1 lbs.
  • PSV-Kit 4”h x 9.0”w x 4.2”d 1 lbs


CTP 2X2

Ceiling Tile Panel Mount

  • A heavy-duty 2’ x 2’ mounting panel which replaces a grid tile or hangs above the ceiling grid tile from support wires
  • Versatile pole position within a 2’ x 2’ footprint
  • Easy solution to work around obstructions like HVAC ducts
  • Available in light-duty model- 50 lb. capacity
  • Two standard electrical j-boxes
  • Threaded coupler for 2” pole
  • Includes support wire and four turnbuckles
  • CTP 2x2 has a white powder coat finish
  • CTP 2x2LD has a galvanized steel finish suitable for installation above tiles

Specifications

  • 2” pole
  • Weight capacity: 160 lbs. (50 lbs for LD model)

Dimensions (not including mount, pole, or projector):

  • CTP 2x2 23.7”w x 23.7”d x 2.5”h 15 lbs.
  • CTP 2x2LD 23.7”w x 23.7”d x 2.5”h 6 lbs.

CTP 1X2LD

Ceiling Tile Panel Mount

  • A light-duty 8” x 2’ mounting panel which hangs above the ceiling grid tile from support wires
  • Versatile pole position within a 2’ x 2’ footprint
  • Easy solution to work around obstructions like HVAC ducts
  • Panel has four T-bar grid stabilizing screws
  • Two cutouts for standard electrical j-boxes
  • Threaded coupler for 2” pole
  • Includes support wire and four turnbuckles
  • Stylish galvanized finish

Specifications

  • 2” pole
  • Weight capacity: 50 lbs.

Dimensions (not including mount, pole, or projector):

  • CTP 1x2 8”w x 25.4”d x 1”h 6 lbs.
  • Support wire spacing: 8”w x 23.0”d


TOP