Projector Lifts

DL3W Series Ceiling Lift

DL3W Series Ceiling LiftThe DL3W Series Projector Lifts are designed for large-venue projectors and plasma arrays that require long lowering distances.

  • Three positions: stowed, show, service
  • For large projectors and flat panel arrays that require long lowering distances
  • Digital control accurate to less than 1/16"
  • Cable management system
  • Whisper-quiet operation
  • Includes programmable wired hand-held remote
  • Accessories: optional controls - RS232, IR, RF, optional closure styles for finished for grid tile, plenum enclosures, AVStack frames and motorized rotation, cable pre-wire package



Product Dimensions Weight Capacity Lowering Distance Weight
DL3W-12 31.5"w x 33.0"l x 7.25"h 400 lbs. 12' 199 lbs.
DL3W-14 31.5"w x 33.0"l x 8.25"h 400 lbs. 14' 202 lbs.
DL3W-16 31.5"w x 33.0"l x 9.25"h 400 lbs. 16' 218 lbs.
DL3W-18 31.5"w x 33.0"l x 11.25"h 400 lbs. 18' 228 lbs.
DL3W-20 31.5"w x 33.0"l x 12.25"h 400 lbs. 20' 238 lbs.
DL3W-24 31.5"w x 33.0"l x 14.25"h 400 lbs. 24' 247 lbs.
DL3W-28 31.5"w x 33.0"l x 17.25"h 400 lbs. 28' 252 lbs.
  • Contact closure operation - 12V trigger in / out
  • Power requirements: 110V, 3.5 amp; 220V, 2 amp
  • Dual drive drum for safety
  • Digital electronics with self diagnostics
  • User programmable show / service positions
  • Specify projector / lens for proper mount / closure
  • Requires Display Devices mount adapter
  • 1 year warranty


Click on the thumbnails below to enlarge the image.

Product Drawings

Adobe ReaderDownloads require the Adobe Reader to view.

xxx Mounting Adapter interface for projector. Must specify make and model number of projector and lens if projector offers lens options.
OPT-1 Ceiling Closure Frame. Used with drywall or wood ceilings. Provides 2" trim finish for projector opening. Spring-loaded and fully adjustable. Note: EBR is recommended for installations with restricted access.
OPT-1L Lipless Ceiling Closure Frame - Provides minimal seam around projector opening for drywall or wood ceilings. Spring-loaded and fully adjustable. Note: EBR is recommended for installations with restricted access.
OPT-3 Plenum-Rated Housing With Closure Frame - Enclosed support framework and closure frame for drop-tile ceilings with plenum requirements. 2" trim finish for projector opening. Includes ceiling closure, spring-loaded and fully adjustable.
OPT-3L Plenum-Rated Housing With Lipless Closure Frame. Enclosed support framework and closure frame for drop-tile ceilings with plenum requirements. Provides minimal seam around projector opening. Includes ceiling closure, spring-loaded and fully adjustable.
OPT-4 Non-Plenum-Rated Housing With Closure Frame. Support framework and closure frame for drop-tile ceilings with non-plenum requirements. 2" trim finish for projector opening. Includes ceiling closure, spring loaded and fully adjustable.
OPT-4L Non-Plenum Rated Housing With Lipless Closure Frame. Support framework and closure frame for drop-tile ceilings with non-plenum requirements. Provides minimal seam around projector opening. Includes ceiling closure, spring loaded and fully adjustable.
OPT-5 Bomb Bay Door ceiling closure system. Provides support framework and dual opening doors for non-plenum applications.
OPT-9 RS-232 Serial control interface - allows for unlimited show positions when using a third party control system (Crestron/AMX).
OPT-11A Cable Pre Wire - Pre-wire of lift with control, signal and power cabling.
PCS-02 Power Current Sensor for projectors and Flat Panel Displays, 110V only.
EMRCM Electronic Motorized Rotating Ceiling Mount. Adds rotation of a projector to any Display Devices projector lift. Controlled via third party RS-232 (i.e., Crestron, AMX, etc.) to allow two programmable vertical and rotational show positions. Weight capacity of 100 lbs. including closure. 110V/220V.
REM-IR Wireless Infrared Remote Control. May be used with any motorized Display Devices product.
REM-RF Wireless RF Remote Control. May be used with any motorized Display Devices product.
WPR-L01-W Wall Plate Remote for all lifts. Single-gang white.
WPR-L01-B Wall Plate Remote for all lifts. Single-gang black.
WPR-L01-S Wall Plate Remote for all lifts. Single-gang brushed steel.
REM-L19-RM Rack Mount Panel Remote wired control panel. 1.75" x 19" EIA. Black.
REM-L02-WLKY-W Locking Wall Plate Remote wired control panel with security key lock. 2-gang, white.
REM-L02-WLKY-B Locking Wall Plate Remote wired control panel with security key lock. 2-gang, black.
REM-L02-WLKY-S Locking Wall Plate Remote wired control panel with security key lock. 2-gang, brushed steel.
SPK-DL Spare Parts Kit - Includes control electronics, timing sprocket, limit switches, multi meter, motor control box.
EBR Emergency Brake Release - Lowers lift for service access. Recommended when access to a retracted lift is restricted i.e., drywall. Must be purchased at the same time as the lift.

This lift is an excellent choice for:

  • Boardrooms
  • Auditoriums
  • Churches