DL3W DataWide Series Projector Lifts

Dl3W

DataWide DL3W Series Projector Lift

The DL3W Series Projector Lifts are designed for large-venue projectors and flat screens that require long lowering distances.

  • Three positions: stowed, show, service
  • For large projectors and flat panel arrays that require long lowering distances
  • Digital control repeatable to better than 1/16"
  • Cable management system
  • Whisper-quiet operation
  • Black powder coat finish (white available at additional cost & time)
  • Includes programmable wired hand-held remote
  • Accessories: optional controls - RS232, IR, RF, optional closure styles for finished for grid tile, plenum enclosures (primer gray finish), AVStack frames and motorized rotation, cable pre-wire package

Specifications

Product Dimensions Weight Capacity Lowering Distance Weight
DL3W-12 31.5"w x 33.0"l x 7.25"h 400 lbs. 12' 199 lbs.
DL3W-14 31.5"w x 33.0"l x 8.25"h 400 lbs. 14' 202 lbs.
DL3W-16 31.5"w x 33.0"l x 9.25"h 400 lbs. 16' 218 lbs.
DL3W-18 31.5"w x 33.0"l x 11.25"h 400 lbs. 18' 228 lbs.
DL3W-20 31.5"w x 33.0"l x 12.25"h 400 lbs. 20' 238 lbs.
DL3W-24 31.5"w x 33.0"l x 14.25"h 400 lbs. 24' 247 lbs.
DL3W-28 31.5"w x 33.0"l x 17.25"h 400 lbs. 28' 252 lbs.
  • Contact closure operation - 12V trigger in / out
  • Power requirements: 110V, 3.5 amp; 220V, 2 amp
  • Dual drive drum for safety
  • Digital electronics with self diagnostics
  • User programmable show / service positions
  • Specify projector / lens for proper mount / closure
  • Requires Display Devices mount adapter
  • 1 year warranty

Additional Photos

dl3w-06 dl3w-05 dl3w-04 dl3w-02 dl3w-01

Accessories

xxx Mounting Adapter interface for projector. Must specify make and model number of projector and lens if projector offers lns options.
OPT-1 Ceiling Closure Frame. Used with drywall or wood ceilings. Provides 2" trim finish for projector opening. Spring-loaded and fully adjustable. Note: EBR is recommended for installations with restricted access.
OPT-1L Lipless Ceiling Closure Frame - Provides minimal seam around projector opening for drywall or wood ceilings. Spring-loaded and fully adjustable. Note: EBR is recommended for installations with restricted access.
OPT-3 Plenum-Rated Housing With Closure Frame - Enclosed support framework and closure frame for drop-tile ceilings with plenum requirements. 2" trim finish for projector opening. Includes ceiling closure, spring-loaded and fully adjustable.
OPT-3L Plenum-Rated Housing With Lipless Closure Frame. Enclosed support framework and closure frame for drop-tile ceilings with plenum requirements. Provides minimal seam around projector opening. Includes ceiling closure, spring-loaded and fully adjustable.
OPT-4 Non-Plenum-Rated Housing With Closure Frame. Support framework and closure frame for drop-tile ceilings with non-plenum requirements. 2" trim finish for projector opening. Includes ceiling closure, spring loaded and fully adjustable.
OPT-4L Non-Plenum Rated Housing With Lipless Closure Frame. Support framework and closure frame for drop-tile ceilings with non-plenum requirements. Provides minimal seam around projector opening. Includes ceiling closure, spring loaded and fully adjustable.
OPT-5 Bomb Bay Door ceiling closure system. Provides support framework and dual opening doors for non-plenum applications.
OPT-9 RS-232 Serial control interface - allows for unlimited show positions when using a third party control system (Crestron/AMX).
OPT-11A Cable Pre Wire - Pre-wire of lift with control, signal and power cabling.
PCS-02 Power Current Sensor for projectors and Flat Panel Displays, 110V only.
EMRCM Electronic Motorized Rotating Ceiling Mount. Adds rotation of a projector to any Display Devices projector lift. Controlled via third party RS-232 (i.e., Crestron, AMX, etc.) to allow two programmable vertical and rotational show positions. Weight capacity of 100 lbs. including closure. 110V/220V.
REM-IR Wireless Infrared Remote Control. May be used with any motorized Display Devices product.
REM-RF Wireless RF Remote Control. May be used with any motorized Display Devices product.
WPR-L01-W Wall Plate Remote for all lifts. Single-gang white.
WPR-L01-B Wall Plate Remote for all lifts. Single-gang black.
WPR-L01-S Wall Plate Remote for all lifts. Single-gang brushed steel.
REM-L19-RM Rack Mount Panel Remote wired control panel. 1.75" x 19" EIA. Black.
REM-L02-WLKY-W Locking Wall Plate Remote wired control panel with security key lock. 2-gang, white.
REM-L02-WLKY-B Locking Wall Plate Remote wired control panel with security key lock. 2-gang, black.
REM-L02-WLKY-S Locking Wall Plate Remote wired control panel with security key lock. 2-gang, brushed steel.
SPK-DL Spare Parts Kit - Includes control electronics, timing sprocket, limit switches, multi meter, motor control box.
EBR Emergency Brake Release - Lowers lift for service access. Recommended when access to a retracted lift is restricted i.e., drywall. Must be purchased at the same time as the lift.

Applications

This lift is an excellent choice for:

  • Boardrooms
  • Auditoriums
  • Churches
TOP